What You Need To Know About Trench Boxes

Many engineering and construction sites require trench digging. These trenches are constructed to lay pipes, telephone lines, and any other tubular construction which must be buried underground, including oil rigs. Trenching in these places can become difficult because of the quantity of water. It’s not straightforward to clean all dirt around objects, but it’s risky to expose skin to danger.

Trenches are necessary for any kind of repair or construction which requires access to the ground. They’re also used as protection against collapse, contingent on the soil’s condition and the material thicknesses put in place with Trench boxes made of steel or aluminum framing to hold it in place temporarily prior to construction begins around them then finalizing by affixing grout between two layers if needed so that there are no cracks when installed properly at site at a level that could expand in time due to.

Pre Installation

It is vital to be aware of any potential risks before starting excavation. This includes knowing what equipment is needed and the number of people will have access. This also permits you to think about alternative methods of accomplishing the job without placing your life at risk. Before excavation surveys should include the full risk assessment needed to ensure that any potential hazards can be easily identified. This will help reduce risks that could arise later.

You should also take into consideration the depth of the trench. A 5-foot length of concrete can support you. If the trench is larger than this, then shoring or sloping is required. If, however, the deep trench of 20 feet has no straight sides, any structure above ground has to account for the increased danger of foundation movement.

The access to the trench should be done via steps or ladders. In the event of an emergency there should be a safe access within 25 feet. The trench may also be required to assess low oxygen levels and toxic gases using specially-designed boxes referred to as “trench boxes”. The installation of these articulated devices is simple, but they increase the chance of stacking them over one another since you don’t know how high your piles will reach into their vulnerable bottom.

Care For the trench

1. You should check your trench box as well as the support every day to ensure that there is no damage or movement.

2. Always ensure that protective gear is worn by all employees when working on-site.

3. Heavy equipment and tools should be kept at least 3 feet from the edge of the trench.


In the event of a trench, it is likely to be more difficult than excavating it since the ground surrounding it moves. To extract it, you could employ chain slings. An overhead crane can also be used.

1. Straight Pull: This is one of the most fundamental methods of extraction of materials. Attach your sling to the two points, then pull it out. There is no need for excess force or unnecessary movement.

2. Half Pull: A half pull can be used to secure the trench box to one side , and to lift as high as is possible. This will allow you to clean up any debris or dirt without causing damage to your garden.

3. Single Pull One Chain sling to the lifting/extraction point to lift the trench box. Then lift each panel separately by pulling one. Pull the lever to take away the trench box.

For more information, click trench box

Don't hesitate to contact us any time.